• Introduction
  • Parameter

Lifter Bars for Mill Parts

High Chrome White Iron Lifter Bars for Mill Parts

High Chrome white iron we can produce include 15%Cr, 18%Cr, 20%Cr and 26%Cr.

Under same working condition,the wear performance of High Chrome mill Lift bar is four times of that of high manganese Lift bar and twice of that of low Chrome alloy steel Lift bar.
Meanwhile, we can produce high Chrome castings as per AS2027, ASTM A532 and BS4844.
Customer-made Mill Lifter bars:
In addition to our Lift bar patented, we can produce liners as per the request of customers.

So far, we have been the regular suppliers of mill Lift bar Now, we have supplied steel caps inserted in rubber lifters for SAG mills and AG mills to some mines in Australia and New Zealand.

Our foundry has complete melting, heat treatment and test equipments,such as mid-frequency induction electrical furnaces,quenching and tempering furnaces, blast shot,spectrometer,Rockwell and Brinell Hardness tester,impactor,UT tester and metallographic microscope.
We achieved the certificate of quality management system ISO.

We have been exporting castings to oversea

Our Photos for Lifter Bar for Mill Parts:

  • Lifter Bars for Mill Parts
  • Lifter Bars for Mill Parts
  • Lifter Bars for Mill Parts

Standard Specification for Cr-Mo Alloy Steel:

Reference Standard

Nominal Chemical Composition (W%)

C

Si

Mn

P

S

Ni

Cr

Mo

AS 2074/L2A

0.45-0.55

≤0.75

0.50-1.00

≤0.04

≤0.04

0.80-1.20

AS 2074/L2B

0.55-0.65

≤0.75

0.50-1.00

≤0.04

≤0.04

0.80-1.50

0.2-0.4

AS 2074/L2C

0.70-0.90

≤0.75

0.50-1.20

≤0.04

≤0.04

1.30-2.40

0.2-0.4

ZG42Cr2Si2MnMo

0.38-0.48

1.5-1.8

0.8-1.2

≤0.04

≤0.04

1.8-2.2

0.2-0.6

ZG45Cr2Mo

0.40-0.48

0.8-1.2

0.4-1.0

≤0.04

≤0.04

≤0.5

1.7-2.0

0.8-1.2

ZG30Cr5Mo

0.25-0.35

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG40Cr5Mo(FED-4A)

0.35-0.45

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG50Cr5Mo

0.45-0.55

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG60Cr5Mo

0.55-0.65

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

FMU-29

0.25-0.45

0.3-1.0

0.6-1.5

≤0.04

≤0.04

6.0-8.0

0.2-0.4

FMU-11

0.90-1.30

0.3-1.0

0.6-1.5

≤0.04

≤0.04

11.0-13.0

0.3-0.5

FMU-13

0.80-1.30

0.4-1.2

0.8-1.5

≤0.04

≤0.04

11.0-13.0

0.4-0.8

FMU-14

1.60-2.00

0.4-1.2

0.8-1.5

≤0.04

≤0.04

11.0-13.0

0.6-1.0

Feedback form contact with us
Product Catalog