• Introduction
  • Parameter

Cr Mo Steel Lifter Bars Manufacturer

The Cr Mo Steel Lifter Bars are widely used in AG Mill, SAG Mill and Ball Mills.
Hardness: HB310-375 (equivalent to HRC33-42)
Impact resistant Value: Ak≥60J (60×10×10mm) in normal ambient temperature.
We can produce pearlitic Cr Mo Steel Lifter Bars as per AS2074 Gr L / 2B.
Customer-made Cr Mo Steel Lifter Bars:
In addition to our Cr Mo Steel Lifter Bars, we can produce liners as per the request of customers.
So far, we have been the regular suppliers of mill liners Now.
We have supplied inserted in Cr Mo Steel Lifter Bar for SAG mills and AG mills to some mines in Australia and New Zealand.

Depending on the specific working conditions,all wear parts can be ordered as Manganese Steel,high Cr cast iron or Cr-Mo Alloy Steel.

Our foundry has complete melting, heat treatment and test equipments,such as mid-frequency induction electrical furnaces,quenching and tempering furnaces, blast shot,spectrometer,Rockwell and Brinell Hardness tester,impactor,UT tester and metallographic microscope.

We achieved the certificate of quality management system ISO.

We have been exporting castings to oversea

Our Photos for Cr Mo Steel Lifter Bars:

  • Lifter Bars
  • Lifter Bars
  • Lifter Bars
Standard for Cr Mo Steel Lifter Bars:

Standard Specification for Cr-Mo Alloy Steel:

Reference Standard

Nominal Chemical Composition (W%)

C

Si

Mn

P

S

Ni

Cr

Mo

AS 2074/L2A

0.45-0.55

≤0.75

0.50-1.00

≤0.04

≤0.04

0.80-1.20

AS 2074/L2B

0.55-0.65

≤0.75

0.50-1.00

≤0.04

≤0.04

0.80-1.50

0.2-0.4

AS 2074/L2C

0.70-0.90

≤0.75

0.50-1.20

≤0.04

≤0.04

1.30-2.40

0.2-0.4

ZG42Cr2Si2MnMo

0.38-0.48

1.5-1.8

0.8-1.2

≤0.04

≤0.04

1.8-2.2

0.2-0.6

ZG45Cr2Mo

0.40-0.48

0.8-1.2

0.4-1.0

≤0.04

≤0.04

≤0.5

1.7-2.0

0.8-1.2

ZG30Cr5Mo

0.25-0.35

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG40Cr5Mo(FED-4A)

0.35-0.45

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG50Cr5Mo

0.45-0.55

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG60Cr5Mo

0.55-0.65

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

FMU-29

0.25-0.45

0.3-1.0

0.6-1.5

≤0.04

≤0.04

6.0-8.0

0.2-0.4

FMU-11

0.90-1.30

0.3-1.0

0.6-1.5

≤0.04

≤0.04

11.0-13.0

0.3-0.5

FMU-13

0.80-1.30

0.4-1.2

0.8-1.5

≤0.04

≤0.04

11.0-13.0

0.4-0.8

FMU-14

1.60-2.00

0.4-1.2

0.8-1.5

≤0.04

≤0.04

11.0-13.0

0.6-1.0

Feedback form contact with us
Product Catalog