• INTRODUCTION
  • PARAMETER
  • Q&A

Cr-Mo Alloy Steel Crusher Hammers

Minimum order quantity: 10 pieces
Common aliases: Double liquid bimetal composite hammer, composite hammer, wear-resistant Hammers, crusher hammers, cemented carbide hammers, etc.
Applicable equipment: Hammer crusher, compound crusher, high-efficiency fine crusher, impact crusher, brick making machine, clinker crusher
Main material: High chromium alloy, high manganese steel, wear resistant alloy steel, bimetal composite, composite material, high chromium material, multiple alloy Steel, high and low chromium cast iron
Applicable materials: It is suitable for crushing medium-hard materials such as limestone, slag, coke, coal and other materials in the industrial sectors of cement, chemical industry, electric power, metallurgy, etc.

Crusher Hammers Structure and characteristics:

1.Center of gravity of the Crusher Hammers head of the hammer crusher moves outward in the radius of gyration, and the linear speed of the hammer head increases during operation.
2.Impact energy of the hammer head of the hammer crusher on the material is increased, thereby improving the crushing effect.
3.Effective wear of the Crusher Hammers head of the hammer crusher has been increased. The effective wear of the hammer head per unit weight accounts for about one-third.
4.Total weight of the improved structure changes little, and one set of hammers is equivalent to the two sets before the improvement, which reduces the cost of use.
5.Improve the grinding effect. After the secondary crushing of limestone and other materials, energy consumption and efficiency must be studied.
6.Crushing efficiency is higher than the grinding efficiency and the power consumption is low.
7.Output particle size is 8-10 mm, 60% of the powder, which greatly improves the production effect of the powder machine and reduces the production cost of raw meal.

Our Photos for Cr-Mo Alloy Steel Crusher Hammers:

  • Crusher Hammers
  • Crusher Hammers
  • Crusher Hammers
  • Crusher Hammers
The technology under modern industry shows that the use of cemented carbide Crusher Hammers performs well in wear resistance.

Crusher hammers are divided into casting hammers and forged hammers according to the manufacturing process, but their wear resistance is different.


The following introduces several common crusher hammer technology:


High manganese steel Crusher Hammers:

Mn13, Mn13Cr2 and Mn18Cr2 material high manganese steel crusher hammers are suitable for large and medium crusher tooth plates, rolling mortar walls, broken walls and large excavator bucket teeth and other strong impact conditions.
It can also be used as liner for ball mill, semi-automatic mill and self-grinding machine.
Although high manganese steel hammers will gradually be replaced by chromium molybdenum alloy steel, high chromium cast iron and nickel hard cast iron, the high toughness characteristics of high manganese steel hammers are unmatched by other wear resistant materials.

High chromium alloy Crusher Hammers:

High chromium composite hammer head, that is, the hammer handle uses high manganese steel, and the hammer head working area uses high chromium alloy.
The two are combined, so that the hammer head of the crusher has high hardness, and the hammer handle has high toughness, giving full play to advantages of the two materials overcome the shortcomings of a single material and meet the performance requirements of the hammer.

Forged Crusher Hammers:

The hammer head of the forging crusher adopts high-quality train wheel steel (material 65Mn, good impact resistance, strong toughness, good wear resistance, and not easy to break).
The metal blank is repeatedly forged by forging machinery to deform it to obtain certain mechanical properties.
A certain shape and size, after a special quenching heat treatment method, ensure that the hammer head’s working area has high hardness and high wear resistance.


Carbide Crusher Hammers:

Compared with other materials, cemented carbide hammers have higher hardness, bending strength and impact, thermal fatigue resistance, good thermal hardness, and low cost.
It solves the cracks, desoldering, Problems such as collapse, block loss, etc.

Specification:
According to drawings, heat resistance, surface treatment requirement, Various types of 2D or 3D drawings are acceptable, etc.
Cost effective:
Integrated production from mold-making to post-processing is completed in our own factory. 
This can effectively reduce the manufacturing cost.
We have first rate production line, the most professional staff, and the advanced equipment and inspection method for casting. 
super quality,competitive price and strict delivery time.

Crusher Hammers Technical Parameters:

Model Rotor diameter length(mm) Inlet size width * length(mm) Feed size(mm Production capacity Motor Power(kw) Theoretical weight(t) Dimensions,Length, width and height(mm)
PCZ1308 1310×790 850×800 ≤600 100-160 132 11.2 2818×2100×2390
PCZ1510 1500×900 1000×90 ≤700 160-210 132×2 17.1 3260×2414×2750
PCZ1512 1500×1160 1200×900 ≤750 250-320 160×2 18.9 3260×2624×2750
PCZ1615 1650×1452 1500×1200 ≤1000 360-420 200×2 32 3456×2915×3185
PCZ1620 1660×1900 2000×1200 ≤1200 500-800 400×2 46 3500×3100×3200
PCZ1820 1800×2000 2000×1200 ≤1200 700-900 450×2 56 3880×3000×3516
machine type Feed size(mm) Discharge size(mm) Production capacity(m³/h) Motor Power(kw) total weight(t) Dimensions (length × width × height)(mm)
PCΦ400×300 ≤200 ≤25 5-10 11 0.8 900×670×860
PCΦ600×400 ≤250 ≤30 10-22 22 2.26 1200×1050×1200
PCΦ800×600 ≤250 ≤35 18-40 55 4.8 1310×1180×1310
PCΦ1000×800 ≤350 ≤35 25-50 75 5.9 1600×1390×1575
PCΦ1000×1000 ≤350 ≤35 30-55 90 8 1800×1590×1775
PCΦ1250×1250 ≤350 ≤35 35-65 132 14 2060×1600×1890
PCΦ1400×1400 ≤350 ≤35 50-100 280 32 2365×1870×2220
PCΦ1600×1600 ≤350 ≤35 100-150 480 37.5 3050×2850×2800
Q&A:

Q: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q: What kinds of products do you offer?
A: We mainly produce various high alloy steel castings, such as mill liners, jaw crusher spare parts, jaw plates, cone crusher spare parts, Crusher Blow Bars, Crusher Hammers, etc.

Q: What kind of materials are using for the products?
A: We supply all kinds of high alloy steel castings, including manganese steel castings, high manganese steel, nickel hard castings, chromium molybdenum alloy steel, high chromium white iron castings, etc.

Q: What is the maximum weight of a single piece that can be cast, and what is your daily processing capacity?
A: The weight of a single piece that can be cast at one time is 30 tons. The production capacity is 150 tons/working day.

Q: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q: What is the Warranty for our products ?
A: If any quality problems on our side occurred in this period , we will take on the shipping cost and replacement.

Q: How to give inquiry?
A: Step 1, please tell us what weight ,dimension, material do you need please.
Step 2, Better help to provide the drawing with above-mentioned details please.
Step 3, when we have enough details, we may quote accordingly.

Q: What is the delivery time of your products?
A: It depends on the inventory availability.If items needed are in stock, the delivery time would be within 7 work days, but if not the delivery time would be around 30 work days.
We will send working schedule of your order each week.
The detailed inspection picturesion by email.

Q:  Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q: If your product has inferior quality or quality problem after we use them what happens next?
A: First, you have to provide us photos of the problem part and also provide photos of the use.
If it is indeed a quality problem of the product itself, we would offer compensation to you and also figure out solutions to avoid this kind of quality problem in the future.
If the problem is caused by clients, we would provide the technical suggestions to avoid same problems.

Q: Do you support drop shipping?
A: Yes, your drop shipping is aviable.

Q: Transportation?
A: Transported by DHL, UPS, EMS, Fedex, Air freight, Sea freight.

Q:  How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

If you have interest, please do not hesitate to contact me.
Pls send the drawing,technical requirements to us by email.
Looking forward to receiving your inquiry and reply.
Thank you.
Feedback form contact with us
Related Product
Coal Crusher Hammer Manufacturers
Coal Crusher Hammer Manufacturers
Coal Crusher Hammers for Sale Model NO: According to the drawing Coating: Alloy Steel Machining Tolerance: +/-0.01mm Standard: GB/ AISI /DIN /GOST Certification:ISO 9001: 2015 Application: Used in Metallurgy, Mining, Chemical Industry, Cementand Crushing Equipment Our Advantage...
Learn More>
Crusher Hammer Head Manufacturer
Crusher Hammer Head Manufacturer
Crusher Hammer Head Product Name: Crusher Hammer Head Process: High Aolloy Castings Model NO: According to the drawing Main Material: Alloy Steel & High Chromium Alloy Steel Minimum order quantity: 5 pieces Machining Tolerance: +/-0.01mm Standard: GB/ AISI/ DIN/ GO...
Learn More>
Hammer Crusher Parts Suppliers
Hammer Crusher Parts Suppliers
Hammer Crusher Parts Name: Manganese steel hammer, bimetal composite hammer, wear-resistant hammer Application: Used in Metallurgy, Mining, Chemical Industry, Cementand Crushing Equipment, etc. Specification: According to the drawing Machining Tolerance: +/-0.01mm Minimum o...
Learn More>
Product Catalog