• Introduction
  • Parameter

Lifter Bars

Name: Cr-Mo Alloy Steel Casting Lifter Bars
Material:Cr-Mo alloy steel
Material Grade: AS 2074/L2A, AS2074/L2B, AS2074/L2C, ZG45Cr2Mo, ZG30Cr5Mo.
Dimensions:Based on drawings
Hardness:≥HRC60
Heat-treatment:Queching+Tempering
Certification:ISO 9001:2018
Surface treatment:Shot Blasting
Service:OEM ODM
Quality promise:GB/AS
Techinique:Sand casting/Lost foam casting
AK(J/CM2):>20
Surface Finish: Appro.Ra100
Size Tolerance: as per CT13
Microstructure: Fine Martensitic + Carbonate + Retained Austenitic less than 5%
Application: Chute Liners + Hopper Liners + Wear Plates
Cr & Mo casting block part will be compounded with rubber material, and then used in SAG mill.

Cr-Mo Alloy Steel Casting Lifter Bars in general refers to a kind of casting steel with the chromium content at 4-6%, the carbon content at 0.8-1.2%.
Its distinctive feature is to adopt multivariate alloy design. It increases carbide content in the medium carbon alloyed steel, through increasing the Cr & Mo content, the strong carbide forming elements, so as to improve its heat-resisting, wear-resisting performance.

As a result, its high strength, strong toughness and good wear resistance properties represent the relatively high level of metal wear resistant materials.

Our Photos for Lifter Bars for SAG Mill:

  • Lifter Bars
  • Lifter Bars
  • Lifter Bars

Standard Specification for Cr-Mo Alloy Steel:

Reference Standard

Nominal Chemical Composition (W%)

C

Si

Mn

P

S

Ni

Cr

Mo

AS 2074/L2A

0.45-0.55

≤0.75

0.50-1.00

≤0.04

≤0.04

0.80-1.20

AS 2074/L2B

0.55-0.65

≤0.75

0.50-1.00

≤0.04

≤0.04

0.80-1.50

0.2-0.4

AS 2074/L2C

0.70-0.90

≤0.75

0.50-1.20

≤0.04

≤0.04

1.30-2.40

0.2-0.4

ZG42Cr2Si2MnMo

0.38-0.48

1.5-1.8

0.8-1.2

≤0.04

≤0.04

1.8-2.2

0.2-0.6

ZG45Cr2Mo

0.40-0.48

0.8-1.2

0.4-1.0

≤0.04

≤0.04

≤0.5

1.7-2.0

0.8-1.2

ZG30Cr5Mo

0.25-0.35

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG40Cr5Mo(FED-4A)

0.35-0.45

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG50Cr5Mo

0.45-0.55

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

ZG60Cr5Mo

0.55-0.65

0.4-1.0

0.5-1.2

≤0.04

≤0.04

≤0.5

4.0-6.0

0.2-0.8

FMU-29

0.25-0.45

0.3-1.0

0.6-1.5

≤0.04

≤0.04

6.0-8.0

0.2-0.4

FMU-11

0.90-1.30

0.3-1.0

0.6-1.5

≤0.04

≤0.04

11.0-13.0

0.3-0.5

FMU-13

0.80-1.30

0.4-1.2

0.8-1.5

≤0.04

≤0.04

11.0-13.0

0.4-0.8

FMU-14

1.60-2.00

0.4-1.2

0.8-1.5

≤0.04

≤0.04

11.0-13.0

0.6-1.0

Feedback form contact with us
Product Catalog