• Introduction
  • Parameter
  • FAQ

Cone Crusher Liner

Commonly used aliases:

Cone crusher liner, Cone machine liner, Fixed cone liner, Moving cone liner, Metso liner, Metso wall rolling

Main material:

High manganese steel, new high manganese steel, super high manganese steel, new composite materials, modified high manganese steel, Mn13, Mn13Cr2, ZGMn13Cr2, Mn18Cr2, ZGMn18Cr2, Mn18, etc.

Applicable equipment:

Cone crusher, cone crusher, cone crusher, cone crusher, cone crusher, gyratory crusher, Simmons cone crusher, Metso cone crusher, Sandvik cone Machine

Applicable materials:

Cone crushers are widely used in mining industry, metallurgical industry, building materials industry, chemical industry, etc. Suitable for crushing rocks such as iron ore, coal gangue, limestone, cobblestone, copper ore, quartz, iron ore, granite, sandstone, etc. Medium and fine crushing operations are carried out for hard and medium-hard materials.

Cone Crusher Liners Structure and characteristics:

1. The new composite Cone Crusher Liner are cast from new composite materials and have a long service life, three times that of ordinary Cone Crusher Liners:
2. Super wear resistance, the new composite Cone Crusher Liner can adapt to the production environment with extremely harsh industrial and mining conditions, strong abrasiveness and high production intensity:
3. High cost performance, the use of new composite Cone Crusher Liner can reduce the investment cost of casting wear by more than half:
4. Cone Crusher Liner has the characteristics of beautiful appearance, high internal quality, resistance to emptiness, wear, extrusion, and long service life. It fully meets the requirements of the concentrator for the use of Cone Crusher Liner:

Cone Crusher Liners are the main components for crushing materials in the cone crusher. Cone Crusher Liners have U-shaped screws on the adjusting ring. Zinc alloy is injected between the two to make them tightly integrated. Install or replace Cone Crusher Liner. When working for 6 to 8 hours, check the tightening condition and tighten the U-shaped screws again:

Manganese 13 (Mn13) Cone Crusher Liners:

Mn13 has high tensile strength, plasticity and toughness, and non-magnetic. Even if the parts are worn to a very thin thickness, they can still withstand large impact loads without breaking. It can be used to cast various impact-resistant wear parts.
Manganese 13 Chromium 2 (Mn13Cr2) Cone Crusher Liners

Using Mn13Cr2 material, that is, while reducing the content of C and Mn in traditional high manganese steel, adding Cr element to make up for the lack of toughness of traditional high manganese steel and effectively extend the service life of wear-resistant parts.

Manganese 18 (Mn18) Cone Crusher Liners:

Casting wear-resistant manganese steel is the oldest and most widely used type. Especially the standard Mn18 high manganese steel rolling mortar wall, which contains high manganese and carbon content; the as-cast structure of the steel is austenite and carbides. After 1050℃ water toughening treatment, most of the carbides are solid-soluble in austenitic In the body.
EB uses Mn13, Mn13Cr2, Mn17Cr2, Mn18, Mn18Cr2 to produce Cone Crusher Liners according to the customer’s working environment to effectively prevent the wear during the crushing process and greatly extend its service life.
Specification:
According to drawings, heat resistance, surface treatment requirement, Various types of 2D or 3D drawings are acceptable, etc.
Cost effective:
Integrated production from mold-making to post-processing is completed in our own factory.
This can effectively reduce the manufacturing cost.
We have first rate production line, the most professional staff, and the advanced equipment and inspection method for casting.
super quality,competitive price and strict delivery time.
Contact us:
If you have interest, please do not hesitate to contact me.
Pls send the drawing, technical requirements to us by email.
Looking forward to receiving your inquiry and reply.
Thank you.
Item High Cr White Iron High Cr Alloy Steel High Mn Steel Ni-hard Cast Iron
C 2.4-3.2 1.1-2.2 0.9-1.3 2.4-3.6
Si 0.6-1.2 0.6-1.2 ≤0.8 ≤0.8
Mn 0.5-1.0 0.5-1.0 11.0-18.0 ≤2.0
Cr 12.0-30.0 11.0-30.0 1.5-2.5 1.5-10
S ≤0.04 ≤0.04 ≤0.04 ≤0.15
P ≤0.06 ≤0.06 ≤0.06 ≤0.15
Mo 0.1-3.0 0.1-3.0 ≤1.0 ≤0.1
Cu 0.1-1.0 0.1-1.0
Ni 0-0.3 0-0.3 3.3-10
Re
Equivalent
Specification
GB/T8263-1999 GB/T5680-1998 GB/T8263-1999
AS2027 Cr27 DL/T 681-1999 AS2027/Ni-Cr1-550
AS2027 CrMo 15/3 JIS G 5153-1999 AS2027/Ni-Cr2-500
AS2027 CrMo 20/2/1 ASTM A128 AS2027/Ni-Cr4-500
ASTM A532 Class Type A 25%Cr DIN GX120Mn12 AS2027/Ni-Cr4-600
ASTM A532 Class Type B 15%Cr-Mo AFNORZ120Mn12 AS2027/Ni-Cr4-630
BS 4844 3E ASTM A532 1-A,B,C,D
DIN1695 ASTM A532 2-A,B,C,D,E
NFA32401 ASTM A532 3-A
Material Type Martensite Matrix Austenitic Mn Steel
Hardness HRC≥56 HB≤300 HRC≥56
Impact Value AK≥4J AK≥80J

Cone Crusher Liner Technical Parameters

Name

Large mouth diameter/mm

Small mouth diameter/mm

height/mm

weight/Kg

Cone Crusher Liner

1226

969

427

627

Cone Crusher Liner

1106

435

380

593

Cone Crusher Liner

1225

968

430

633

Cone Crusher Liner

1070

770

434

403

Cone Crusher Liner

1063

784

397

350

Cone Crusher Liner

963

300

428

374

Cone Crusher Liner

1060

800

422

554

Cone Crusher Liner

982

275

460

422

Cone Crusher Liner

1060

800

358

527

Cone Crusher Liner

1060

800

359

515

Cone Crusher Liner

1060

800

364

503

Cone Crusher Liner

974

280

463

480

Cone Crusher Liner

1060

800

389

528

Cone Crusher Liner

1161

300

554

791

Cone Crusher Liner

1240

940

429

763

Cone Crusher Liner

1240

940

438

745

Cone Crusher Liner

1240

940

466

860

Cone Crusher Liner

1066

453

520

500

Cone Crusher Liner

1160

470

900

954

Cone Crusher Liner

1203

463

563

754

Item Cr-Mo Alloy Steel I Cr-Mo Alloy Steel II Cr-Mo Alloy Steel III High Cr white iron High Cr Alloy Steel High Manganese Steel Ni-Hard cast iron
C 0.30~0.50 0.65~0.90 0.40~0.90 2.40~3.20 1.1~2.2 0.90~1.30 2.40~3.60
Si 0.50~1.20 ≤0.75 0.70~1.20 0.60~1.20 0.60~1.20 ≤0.08 ≤0.80
Mn 0.40~1.20 0.50~1.20 0.60~1.00 0.50~1.00 0.50~1.00 11.00~18.00 ≤2.0
Cr 1.70~2.50 1.50~2.50 4.00~7.00 12.00~30.00 11.00~30.00 1.50~2.50 1.5~10
S ≤0.04 ≤0.06 ≤0.04 ≤0.04 ≤0.04 ≤0.04 ≤0.15
P ≤0.04 ≤0.06 ≤0.06 ≤0.06 ≤0.06 ≤0.06 ≤0.15
Mo ≤0.5 ≤0.5 ≤0.5 0.10~3.0 0.10~3.0 ≤1.0 ≤0.10
Cu 0.10~0.60 ≤0.25 0.20~0.40 0.10~1.00 0.10~1.00 - -
Ni ≤0.50 ≤0.30 0~0.30 0~0.30 0~0.30 - 3.3~10
Re ≤0.02 ≤0.02 ≤0.02 - - - -
FAQ:

Q: Can you manufacture Customization products?
A: Yes, we can.
We can produce both standard and special prosucts.
Our can make them according to your drawings and samples.

Q: Do you provide free samples?
A: Yes, usually we provide free samples for testing under the condition of freight paid by customer.

Q: What is the Warranty for our products ?
A: If any quality problems on our side occurred in this period , we will take on the shipping cost and replacement.

Q: Can the products be customized as our need, such as put on our logo?
A: Surely our products can be customized as your need, Put on your logo is also available.

Q: What information do we need to provide to you in order to confirm our parts order?
A: provide us your drawings or detailed specifications for our technical staff could make the drawing.

Q:  Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q: When will make delivery?
A: Delivery Time
Sample Order: 20days after receipt of the full payment.
Stock Order: 10 days after receipt of the full payment.
OEM Order: 40 days after receipt of the deposit.

Q: After-sales Service?
A: 1 year warranty for all kinds of products;
If you find any defective accessories first time, we will give you the new parts for free to replace in the next order, as an experienced manufacturer, you can rest assured of the quality and after-sales service.

Q: Transportation?
A: Transported by DHL, UPS, EMS, Fedex, Air freight, Sea freight.

Q: Do you support drop shipping?
A: Yes, your drop shipping is aviable.

Q: What kind of materials are using for the products?
A: We supply all kinds of high alloy steel castings, including manganese steel castings, high manganese steel, nickel hard castings, chromium molybdenum alloy steel, high chromium white iron castings, etc.

Q: What kinds of products do you offer?
A: We mainly produce various high alloy steel castings, such as mill liners, jaw crusher spare parts, jaw plates, cone crusher spare parts, Crusher Blow Bars, Crusher Hammers, etc.

Q: What is the maximum weight of a single piece that can be cast, and what is your daily processing capacity?
A: The weight of a single piece that can be cast at one time is 30 tons. The production capacity is 150 tons/working day.
Feedback form contact with us
Related Product
Cone Crusher Mantle for Sale
Cone Crusher Mantle for Sale
Cone Crusher Mantle Commonly used aliases: Bowl Liner, crusher liners, cone liners,crusher mantle,cone crusher wear parts. Main material: High manganese steel, Super high manganese steel, new composite materials, modified high manganese steel, Mn13, Mn13Cr2, ZGM...
Learn More>
Cone Liners in Crusher Parts
Cone Liners in Crusher Parts
Cone Liners in Crusher Parts Cone Liners used aliases: Bowl Liner, crusher liners, cone liner, cone crusher wear parts, Crusher Parts. Main material: Manganese steel, super high manganese steel, new composite materials, modified high manganese stee...
Learn More>
Product Catalog